產品列表 - 產品列表 - 開關電源-電源適配器-電池充電器-變壓器-深圳市盛泰實業有限公司

產品列表

V \ W	5W	5W-N	10W	12W	15W	18W	24W	25W	36W	45W	65W
3.0V	1.5A	*	2A	2A	2.5A	2A	*	Double 5V 1.5A 12V 1.5A	*	*	*
3.0V	*	*	*	*	*	3A	*		*	*	*
3.3V	1.5A	*	2A	2A	2.5A	2A	*		*	*	*
3.3V	*	*	*	*	*	3A	*	*	*	*	*
4.2V	0.7A	*	*	*	*	*	*	*	*	*	*
4.2V	1.2A	*	*	*	*	*	*	*	*	*	*
4.5V	0.5A	*	1.6A	*	*	*	*	*	*	*	*
4.5V	1A	*	*	*	*	*	*	*	*	*	*
5.0V	0.5A	0.5A	1.5A	1.5A	2.5A	2A	3.1A	*	*	*	4.5A
5.0V	1A	1A	2A	2A	*	3A	4A	*	*	*	6A
6.0V	0.5A	*	1.8A	1.8A	2.3A	1.8A	2.9A	*	*	*	4A
6.0V	1A	*	*	2A	*	2.8A	3.8A	*	*	*	5.5A
7.5V	0.8A	*	*	1.6A	*	*	*	*	*	*	4A
7.5V	*	*	*	*	*	*	*	*	*	*	5A
8.0V	*	*	*	*	*	*	*	*	*	*	3A
8.0V	*	*	*	*	*	*	*	*	*	*	5A
9.0V	0.4A	*	1.3A	1.3A	1.6A	1.3A	2.1A	*	*	3A	2.8A
9.0V	0.65A	*	*	*	*	2A	2.6A	*	*	4.5A	5A
10V	*	*	1.2A	1.2A	1.5A	1.2A	1.9A	*	*	*	3A
10V	*	*	*	*	*	1.8A	2.4A	*	*	*	4.5A
12V	0.5A	*	1A	1A	1.25A	1A	1.6A	*	2.1A	3.1A	4A
12V	*	*	*	*	1A	1.5A	2A	*	3A	3.8A	*
15V	0.4A	*	0.8A	0.8A	*	0.8A	1.2A	*	1.7A	2.5A	1.5A
15V	*	*	*	*	*	1.2A	1.6A	*	2.4A	3A	3.3A
16V	*	*	*	*	*	*	*	*	1.6A	2.4A	2.5A
16V	*	*	*	*	*	*	*	*	2.3A	2.8A	3.3A
19V	*	*	*	*	*	*	*	*	1.3A	2.1A	1.5A
19V	*	*	*	*	*	*	*	*	2A	2.3A	3A
19.5V	*	*	*	*	*	*	*	*	1.3A	2.1A	*
19.5V	*	*	*	*	*	*	*	*	2A	2.3A	*
24V	0.25A	*	*	*	*	0.4A	0.8A	*	1.1A	1.6A	1A
24V	*	*	*	*	*	0.75A	1A	*	1.5A	1.9A	2.7A

PRODUCTS : SWITCHING MODE AC/DC ADAPTERS & BATTERY CHARGERS

A switched-mode power supply, switching-mode power supply or SMPS, is an electronic power supply unit (PSU) that incorporates a switching regulator. While a linear regulator maintains the desired output voltage by dissipating excess power in a "pass" power transistor, the SMPS rapidly switches a power transistor between saturation (full on) and cutoff (completely off) with a variable duty cycle whose average is the desired output voltage. The resulting rectangular waveform is low-pass filtered with an inductor and capacitor. The main advantage of this method is greater efficiency because the switching transistor dissipates little power in the saturated state and the off state compared to the semiconducting state (active region). Other advantages include smaller size and lighter weight (from the elimination of low frequency transformers which have a high weight) nd lower heat generation from the higher efficiency.